Artículos en revistas con arbitraje indizadas (Web of Science, JCR, SCOPUS)
1.- .Artificial neural networks for predicting potentiodynamic tests of brass 70-30
Liga a la publicación
2.- Low hydrogen pressure effect over microhardness and impact toughness of an experimental X-120 microalloyed steel
Liga a la publicación
3.- Gentamicin Release Study in Uniaxial and Coaxial PolyhydroxybutyratePolyethylene GlycolGentamicin Microfibers Treated with Atmospheric Plasma
Liga a la publicación
4.- Hydrogen Diffusion in Nickel Superalloys: Electrochemical Permeation Study and Computational AI Predictive Modeling
Liga a la publicación
5.- Hydrogen Diffusion in Nickel Superalloys: Electrochemical Permeation Study and Computational AI Predictive Modeling
Liga a la publicación
6.- Artificial neural networks for predicting potentiodynamic test of brass
Liga a la publicación
7.- Hydrogen Diffusion in Nickel Superalloys: Electrochemical Permeation Study and Computational AI Predictive Modeling
Liga a la publicación
8.- Determination of the sound absorption capacity of hydraulic concrete mixtures added with waste tire rubber
Liga a la publicación
9.- Artificial neural networks for predicting potentiodynamic test of brass
Liga a la publicación
10.- Use of Avocado to Obtain an Ammonium Quaternary Salt as CO2?Corrosion Inhibitor of a Duplex Stainless Steel
Liga a la publicación
11.- Synthesis of Magnesium-Based Alloys by Mechanical Alloying for Implant Applications
Liga a la publicación
12.- Effect of Plasma Nitriding and Oxidation on the Corrosion Resistance of 304 Stainless Steel in LiBr/H2O and CaCl2-LiBr-LiNO3-H2O Mixtures
Liga a la publicación
13.- Surface modification of the Nylon 6,6 and wasted glass fiber?Nylon 6.6 coatings using atmospheric plasma treatment
Liga a la publicación
14.- Life Cycle Analysis of a Novel Process from the Automotive Industry in Mexico for Recycling Nylon 6,6 into Polymeric Coatings
Liga a la publicación
15.- Atmospheric plasma treatment to improve the surface properties of P3HB coating. A study of the influence of substrate roughness.
Liga a la publicación
16.- Gentamicin Release Study in Uniaxial and Coaxial Polyhydroxybutyrate Polyethylene GlycolGentamicin Microfibers Treated with Atmospheric Plasma.
Liga a la publicación
17.- Measurements of Electron Density, Temperature and Absolute Metastable 1s3 and 1s5 states of Ar in Ar-CO dc Discharge Employing Emission Spectroscopy
Liga a la publicación
18.- Life Cycle Analysis of a Novel Process from the Automotive industry in Mexico for Recycling Nylon 6,6 into Polymeric Coatings,
Liga a la publicación
19.- Surface modification of the Nylon 6,6 and wasted Glass Fibre-Nylon 6.6 coatings using atmospheric plasma treatment
Liga a la publicación
20.- Synthesis of Magnesium?Based Alloys by Mechanical Alloying for Implant Applications
Liga a la publicación
21.- Gentamicin Release Study in Uniaxial and Coaxial PolyhydroxybutyratePolyethylene GlycolGentamicin
Microfibers Treated with Atmospheric Plasma.
Liga a la publicación
22.- Atmospheric plasma treatment to improve the surface properties of P3HB coating. A study of the influence of substrate roughness
Liga a la publicación
23.- Effect of plasma nitriding and oxidation on the corrosion resistance of 304 stainless steel in LiBr/H2O and CaCl2-LiBr-LiNO3-H2O mixtures
Liga a la publicación
24.- Evaluation of Poly-3-Hydroxybutyrate (P3HB) Scaffolds Used for Epidermal Cells Growth as Potential Biomatrix
Liga a la publicación
25.- Synthesis of non-ionic, cationic, and anionic surfactant from coconut oil for remediation of diesel contaminated soil
Liga a la publicación
26.- Failure Analysis of Austenitic Stainless Steel Implant Screws and Prospection of Chemical Composition Using Artificial Intelligence.
Liga a la publicación
27.- Beehive wind turbine: A new design for electric power generation in urban and semi-urban zones.
Liga a la publicación
28.- The feasibility of masks and face shields designed by 3D printing makers; some considerations of their use against the COVID-19.
Liga a la publicación
29.- Beehive wind turbine: A new design for electric power generation in urban and semi-urban zones
Liga a la publicación
30.- Development of a wind turbine using 3D printing: A prospection of electric power generation from daily commute by car
Liga a la publicación
31.- Failure Analysis of Austenitic Stainless Steel Implant Screws and Prospection of Chemical Composition Using Artificial Intelligence
Liga a la publicación
32.- Sntesis de surfactante no inico, catinico y aninico a partir de aceite de coco, para la remediacin de suelos contaminados con disel.
Liga a la publicación
33.- Corrosion inhibition of aluminum 2024-T3 in 3.5% NaCl by using litchi chinensis extract.
Liga a la publicación
34.- Synthesis of non-ionic, cationic, and anionic surfactant from coconut oil for remediation of diesel contaminated soil
Liga a la publicación
35.- Failure Analysis of Austenitic Stainless Steel Implant Screws and Prospection of Chemical Composition Using Artificial Intelligence
Liga a la publicación
36.- Hydrogen gaseous embrittlement effect over mechanical properties of an experimental X-120 microalloyed steel subjected to heat treatments and different cooling rates
Liga a la publicación
37.- Studies on the effect of long-chain and head groups of nonionic surfactants synthesized from palm and coconut oil on the formation of silver nanoparticles.
Liga a la publicación
38.- Removal efficiency of Rhodamine B dye by atmospheric plasma
Liga a la publicación
39.- Microbiological study of the effect of a dielectric barrier discharge interaction on processed orange juices exposed to the environment
Liga a la publicación
40.- Synthesis, and characterization of CN thin films produced by DC-pulsed Sputtering in an CH3CH2OH-N2 atmosphere
Liga a la publicación
41.- Experimental study of the modified Pachens law: glow discharge of Ethanol (CH3CH2OH), methanol (CH3OH) and its mixture,
Liga a la publicación
42.- Effect of natural inhibitors on microalloyed steel corrosion in E5 and E10 biofuels
Liga a la publicación
43.- Studies on the effect of long-chain and head groups of non-ionic surfactants synthesized from palm and coconut oil on the formation of silver nanoparticles,
Liga a la publicación
44.- Surface modification of polyethylene terephthalate (PET) by corona discharge plasma
Liga a la publicación
45.- ZnO Films Incorporation Study on Macroporous Silicon Structure.
Liga a la publicación
46.- Hydrogen diffusion in Ni-Cr-Fe system
Liga a la publicación
47.- Development of a wind turbine using 3D printing: A prospection of electric power generation from daily commute by car
Liga a la publicación
48.- Wear Behavior of a Ni/Co Bilayer Coating by Physical Vapor Deposition on AISI 1045 Steel
Liga a la publicación
49.- Surface modification of polypropylene by atmospheric pressure plasma
Liga a la publicación
50.- The feasibility of masks and face shields designed by 3D printing makers; some considerations of their use against the COVID-19
Liga a la publicación
51.- Hydrogen diffusion in Ni-Cr-Fe system
Liga a la publicación
52.- Development of a wind turbine using
3D printing: A prospection of electric
power generation from daily commute
by car
Liga a la publicación
53.- Effect of the Substitution of Sand by Rubber of Waste Tires on the Mechanical Properties of Hydraulic Concrete and Exposure to Gamma Radiation
Liga a la publicación
54.- Degradation of acid red 1 catalyzed by peroxidase activity of iron oxide nanoparticles and detected by SERS
Liga a la publicación
55.- Development of a wind turbine using 3D printing: A prospection of electric power generation from daily commute by car
Liga a la publicación
56.- Effect of the substitution of sand by rubber of waste tires on the mechanical properties of hydraulic concrete and exposure to gamma radiation
Liga a la publicación
57.- Surface Modification of Polyethylene Terephthalate (PET) By Corona Discharge Plasma
Liga a la publicación
58.- Use of a Gemini-Surfactant Synthesized from the Mango Seed Oil as a CO2-Corrosion Inhibitor for X-120 Steel
Liga a la publicación
59.- Corrosion Resistance of a Plasma-Oxidized Ti6Al4V Alloy for Dental Applications, Coatings 11, 1136 (2021).
Liga a la publicación
60.- Wear Behavior of a Ni/Co Bilayer Coating by Physical Vapor Deposition on AISI 1045 Steel
Liga a la publicación
61.- Surface Modification of Polyethylene Terephthalate (PET) By Corona Discharge Plasma
Liga a la publicación
62.- Superficial Surface Treatment using Atmospheric Plasma on Recycled Nylon 6,6
Liga a la publicación
63.- Surface Modification of Polypropylene by Atmospheric Pressure Plasma,
Liga a la publicación
64.- Discoloration and mineralization of Direct Orange 39 textile dye in water by atmospheric plasma and ferrous ion,
Liga a la publicación
65.- Influence of physical and chemical parameters in the treatment of Basic Red dye 46 by atmospheric plasma
Liga a la publicación
66.- Effect of atmospheric plasma treatment on the wettability of UHMWPE
Liga a la publicación
67.- Degradation of Acid Red 1 Catalyzed by Peroxidase Activity of Iron Oxide Nanoparticles and Detected by SERS,
Liga a la publicación
68.- Degradation of Acid Red 1 Catalyzed by Peroxidase Activity of Iron Oxide Nanoparticles and Detected by SERS
Liga a la publicación
69.- The impact of heat input on the microstructures, fatigue behaviors, and stress lives of TIG-welded 6061-T6 alloy joints
Liga a la publicación
70.- Study of the Erosion of Copper by Hot Plasma.
Liga a la publicación
71.- Comparative studies of the mechanical and thermal properties of clay / copolymer nanocomposites synthesized by two in-situ methods and solution blending method
Liga a la publicación
72.- Hydrogen embrittlement susceptibility on X-120 microalloyed steel as a function of tempering temperature.
Liga a la publicación
73.- Development and Corrosion Characterization of Ultra-High Strength steels
Liga a la publicación
74.- Surface Modification of Polyethylene Terephthalate (PET) By Corona Discharge Plasma
Liga a la publicación
75.- Modification of macromolecular dynamics in polyacrylic hybrid nanocomposite with un-treated SiO2 nanoparticles
Liga a la publicación
76.- Electrospinning of polyacrylonitrile nanofibers embedded with zerovalent iron and cerium oxide nanoparticles, as Cr(VI) adsorbents for water treatment.
Liga a la publicación
77.- Surface modification of polyethylene terephthalate (PET) by corona discharge plasma
Liga a la publicación
78.- The impact of heat input on the microstructures, fatigue behaviors, and stress lives of TIG-welded 6061-T6 alloy joints
Liga a la publicación
79.- Crystallinity and hardness enhancement of polypropylene using atmospheric pressure plasma discharge treatment
Liga a la publicación
80.- Development and Corrosion Characterization of Ultra-High-Strength Steels
Liga a la publicación
81.- Discoloration of a textile dye mixture in an aqueous solution using a corona discharge
Desalination and Water Treatment
Liga a la publicación
82.- Langmuir probe, optical, and mass characterization of a DC CO2H2 plasma
Liga a la publicación
83.- Ionization and electron capture for H+ collisions at low keV energy with CCl4 molecules
Liga a la publicación
84.- Electrospinning of polyacrylonitrile nanofibers embedded with zerovalent iron and cerium oxide nanoparticles, as Cr(VI) adsorbents for water treatment
Liga a la publicación
85.- Characterization of DC N2O plasma discharge using optical emission spectroscopy
Liga a la publicación
86.- A. Román, B. Campillo, H. Martínez, O. Flores Prediction of the stacking fault energy in austenitic stainless steels using an artificial neural network International Journal of Engineering and Technical Research Vol. 9, N 1, 31-38 2019.
Liga a la publicación
87.- A Hernández, B Campillo, S Serna, Á Torres, N Loera Characterization of Oxides from Al–Mg–Zn Alloys with Heat Treatment, with Scanning Electron Microscopy and Fluorescence Microscopy Characterization of Minerals, Metals, and Materials, 535-541 (2019) The Minerals, Metals & Materials Series
Liga a la publicación
88.- H Villanueva, BF Campillo, A Molina, J Colín, A Sedano, SA Serna Synthesis and Characterization of Aluminum Matrix Composites Reinforced with (Ni,Cu)3Al Intermetallic Particles via Mechanical Milling Technique Journal of Materials Engineering and Performance 28 (4), 2221-2227 (2019) JMEPEG (2019) ASM International
Liga a la publicación
89.- A Hernández, Á Torres, S Serna, J Mayén, B Campillo Effect of experimental aging on the performance of Al-7.9 Mg-13.3 Zn and Al-10.5 Mg-8.6 Zn Alloys as sacrificial anodes
Metals, 9(8), 863 (2019);
Liga a la publicación
90.- A Fragiel, S Serna, J Malo-Tamayo, P Silva, B Campillo, E.Martínez-Martínez, L.Cota, M.H.Staia, E.S.Puchi-Cabrera and R.Perez Effect of microstructure and temperature on the stress corrosion cracking of two microalloyed pipeline steels in H2S environment for gas transport Engineering Failure Analysis 105, 1055-1068 (2019)
Liga a la publicación
91.- E López-Martínez, D Garzón-Bonetti, O Vázquez-Gómez, P.Garnica-Gonzalez and B.Campillo Estimation of Residual Stresses by Nanoindentation in an Experimental High Strength Microalloyed Steel Subjected to Rapid Thermal Cycles
Journal of Materials Engineering and Performance 28 (12), JMEPEG ), 7324–7331 (2019 )ASM International
Liga a la publicación
92.-
C.T. Segundo, J.V. Sánchez, E. Montiel-Palacios, A. Gómez-Díaz, P.G. Reyes-Romero, H. Martínez- Valencia, Comparative study of the degradation process of Azo textile dyes AB52 and AB210 in water using a type-Corona electric discharge, Desalination and Water Treatment 170, 361-368 (2019). eISSN: 1944-3986 I.F.:1.234 Q2
Liga a la publicación
93.- Título: Electrospinning of polyacrylonitrile nanofibers embedded withzerovalent iron and cerium oxide nanoparticles, as Cr(VI) adsorbents forwater treatment
Autores: E. Vazquez-Velez, L. Lopez-Zarate, H. Martinez-Valencia
Revista: Journal Applied Polymer Science
Fecha de Publicación: 9 de noviembre del 2019.
Estatus: PUBLICADO
Liga a la publicación
94.- Título: Use of fatty amide and anionic surfactant as corrosion inhibitors for carbon steel in different atmospheres.
Autores: E Vazquez-Velez, JG Gonzalez-Rodriguez, ME Escalante-Perez, JM Mendoza, L Martinez-Gomez
Revista: INTERNATIONAL JOURNAL OF CORROSION AND SCALE INHIBITION
Volumen: 8
Paginas: 123-138
Fecha de publicación: 2019/1/1
Estatus: PUBLICADO
Liga a la publicación
95.- Título: Use of a non-ionic gemini-surfactant synthesized from the wasted avocado oil as a CO2-corrosion inhibitor for X-52 steelAutores: A Cruz-Zabalegui, E Vazquez-Velez, G Galicia-Aguilar, M Casales-Diaz, R Lopez-Sesenes, JG Gonzalez-Rodriguez, L Martinez-Gomez Revista: Industrial Crops and Products Volumen: 133 Paginas: 203-211 Fecha de publicación: 2019/7/1 Estatus: PUBLICADO
Liga a la publicación
96.- A. Hernández-Granados, A.N. Corpus-Mendoza, P. M. Moreno-Romero, O.A. Castelo-González, C. Menchaca-Campos, J. Escorcia-García & H. Hu. Optically uniform thin films of mesoporous TiO2 for perovskite solar cell applications. Optical materials 88 (2019) 695-703.
Liga a la publicación
97.- Woo Jung Shin,
A. Hernández-Granados, Wen-His Huang, H. Hu & M. Tao. Sulfurization of Hematite Fe2O3 and Anatase by Annealing in H2S. Materials Chemistry and Physic 222 (2019) 152-158.
Liga a la publicación
98.- J. Escorcia-García, M. Dominguez-Díaz,
A. Hernández-Granados & H. Martínez. Antimony sulfide thin films obtained by chemical bath deposition using tartaric acid as complexing agent. MRS advances, volume 3, Issue 56 (Energy and Technologies) (2018)3307-3313.
Liga a la publicación
99.- M. González-Abrego,
A. Hernández-Granados, C. Guerrero-Bermea, A. Martínez-De la Cruz, D. García-Gutierrez, S. Sepúlveda-Guzmán & R. Cruz-Silva. Mesoporous titania nanofibers by solution blow spinning. Journal of Sol-Gel Science and Tecnnology, 81 (2016) 468-474.
Liga a la publicación
100.- J. García-Cerrillo, A.N. Corpus-Mendoza, P.M. Moreno-Romero
, A. Hernández-Granados & H. Hu. Improvement of the morphological and electrical characteristics of Al3+, Fe3+ and Bi3+-doped TiO2 compact thin films and their incorporation into hybrid solar cells. Materials Science in Semiconductor Processing, 72 (2017) 106-114.
Liga a la publicación
101.- A. Hernández-Granados, J. Escorcia-García, D. Pérez-Martínez, J. García-Cerrillo, C. Menchaca-Campos & H. Hu. Sb2(SxSe1-x)3 sensitized solar cells prepared by solution deposition methods. Materials Science In Semiconductor Processing, 56 (2016) 222-227
.
Liga a la publicación
102.-
Título: Photo-Detachment of Nitrous Oxide in DC Plasma Discharge
Autores: J. López-Patiño, J. Rodríguez,F. B. Yousif, B. E. Fuentes, Marco Rivera, H. Martínez
Revista: IEEE Transactions on Plasma Science
Volumen: 47
Paginas: 4032-4037
Fecha de publicación: 12-julio-2019
Estatus: PUBLICADO
Liga a la publicación
103.- Título: Electrochemical and Optical Behavior of Microalloyed Steel in Near-Neutral Aqueous Solution
Autores: J. Castrellon-Uribe, A. Torres-Islas, S. Serna and H. Martinez
Revista: International Journal of ELECTROCHEMICAL SCIENCE
Volumen: 14
Paginas: 8686-8689
Fecha de publicación: 31-julio-2019
Estatus: PUBLICADO
Liga a la publicación
104.- Título: Ionization and electron capture for H+ collisions at low keV energy with a water-vapor target
Autores: J.R.Legorretaa, J.López-Patiño, B.E.Fuentes, F.B.Yousif, H.Martínezc
Revista: International Journal of Mass Spectrometry
Volumen: 446
Paginas: 116214
Fecha de publicación: diciembre 2019
Liga a la publicación
105.- Título: Defects analysis on the strengthening of solid solution Nb additions in Mo3Si alloys
Autores: Isai Rosalesa, Mara J. Garcia-Ramireza,Constancio Diaz-Reyesa, Horacio Martínez
Revista: Journal of Materials Research and Technology
Volumen: 8
Paginas: 99-104
Fecha de publicación: Enero-Marzo 2019
Estatus: PUBLICADO
Liga a la publicación
106.- Autores: A. Gómez,P. G. Reyes,H. Martínez,J. Vergara,C. Torres & V. Contreras
Título: Pathways in the molecular fragmentation for the C2H5OH/He electrical discharge
Revista: He electrical discharge,Radiation Effects and Defects in Solids
Volumen: 174
Paginas: 255-270
Fecha de publicación: 8 de enero del 2019
Estatus: PUBLICADO
Liga a la publicación
107.- Título: Elimination of AB210 dye in residual textile water by glow-discharge plasma application
Autores: J. Vergara, C. Torres, Montiel E., Gomez A., Vergara J., Reyes P.G., Martinez H.
Revista: Desalination and Water Treatment
Volumen: 150
Paginas: 361-366
Fecha de aceptación: 2 de enero del 2019
Estatus: publicado
Liga a la publicación
108.- Titutlo: Absolute total ionization and dissociative ionization cross sections for H+ impact on N2O within the energy range of 2–10 keV
Autores: J.R.Legorreta, J. López- Patiño, B.E. Fuentes, F.B. Farook, H. Martinez.
Revista: International Journal of Mass Spectrometry
Volumen: 440
Paginas: 10-13
Fecha de publicación: junio 2019
Estatus: PUBLICADO
Liga a la publicación
109.- Título: Influence of the crystalline structure stability in the wettability of poly-β-hydroxybutyrate:polyethylene glycol 6000 fiber mats treated by atmospheric-pressure plasma
Autores: Maraolina Domínguez-Díaz, JoséEscorcia-García, HoracioMartínez
Revista:Nuclear Inst. and Methods in Physics Research B
Volumen: 447
Paginas: 84-91
Fecha de publicación: 15 de Mayo del 2019
Liga a la publicación
110.- Titutlo: Electronegativity Measurements and Analysis for CO and CO in DC Plasma Discharge,
Autores: J. Rodríguez, J. López-Patiño, F. Vázquez, B.E. Fuentes,
H. Martínez, E. Ramírez-Álvarez and F.B. Yousif
Revista: IEEE Transactions on Plasma Science
Pagina: 466-472
Volumen: 47
Fecha de publicación: enero 2019
Estatus:PUBLICADO
Liga a la publicación
111.- Titulo:
Stress corrosion cracking of microalloyed pipeline steel in biofuels E-10 and E-85 “
Autores: A. del Pozo, A. Torres, J.C. Villalobos, A. Sedano,
H. Martínez, B. Campillo, S. A. Serna
Revista: Corrosion Engineering Science and Technology
Paginas: 37-45
Volumen: 54
Fecha de publicación: 24 de octubre 2019
Estatus: PUBLICADO
Liga a la publicación
112.- Titulo:
Microhardness modification of ultrahigh-molecular-weight polyethylene by oxygen plasma: Effect of the polymer crosslinking
Autores: Alfredo Garcia,
Maraolina Dominguez-Diaz, Ricardo Paniagua, Jose Alfredo Hernandez-Perez,
Horacio Martinez
Revista: Nuclear Inst. and Methods in Physics Research B
Paginas: 8-12
Volumen: 445
Fecha de publicación: 15 de abril 2019
Estatus: Publicado
Liga a la publicación
113.- Titulo:
Experimental Study of Ethanol and Helium Mixture Glow Discharge
Autores: S. Perusquía, P. G. Reyes, M. C. González, A. Gómez,
H. Martínez, and J. Vergara
Revista: IEEE Transactions on plasma science
Paginas: 445-450
volumen:47
Fecha de publicación: 1 de enero 2019
Estatus: PUBLICADO
Liga a la publicación
114.- Leal B.,
Castillo F., Gutiérrez J., Golzarri J.I., Gamboa I., Espinosa G.,
Martínez H.
Measurements of Neutrons In A Mixed Gamma- Neutron Field Using Three Different Types of Detectors. Journal of Nuclear Physics, Material Sciences, Radiation and Applications 5(1), 223–235 (2017) ISSN No. Print 2321-8649. ISSN No. Online 2321-9289
Liga a la publicación
115.- P.G. Reyes, A. Gómez, J. Vergara,
H. Martinez, and C. Torres.
Plasma diagnostics of glow discharges in mixtures of CO2 with noble gases, Revista Mexicana de Física 63 (2017) 363-371. ISSN: 0035-001X
Liga a la publicación
116.- Gómez A., Torres-Arenas A.J., Vergara-Sánchez J., Torres C., Reyes P.G.,
H. Martínez, and Saldarriaga-Noreña H., Physical-chemical characterization of the textile dye. Azo Ab52 degradation by corona plasma, AIP Advances 7, 105304 (2017).
Liga a la publicación
117.- H. Martínez, S. Perusquía, M. Villa, P. G. Reyes, F. B. Yousif,
F. Castillo, and V. Contreras,
Study of DC Ar–CO2 mixture plasma using optical emission spectroscopy and mass spectrometry techniques. Physics of Plasmas. 24, 043508 (2017). Print: ISSN 1070-664X. Online:ISSN 1089-7674.
Liga a la publicación
118.- Alarcón F.B., Omaña J.,
Martínez H., Charge transfer cross section for K++ Ar Collisions, Journal of Physics& Astronomy 3(2), 62 (2014).
Liga a la publicación
119.- Colín J., Serna S.,
Campillo B., Flores O., and Juárez-Islas J.
Microstructural and lattice parameter study of as-cast and rapidly solidified NiAl intermetallic alloys with Cu additions.
Intermetallics
16, (7) (2008).
Liga a la publicación
120.- Zagal J. M.*, López H. F., Flores O., Albarrán J. L.,
Martínez L.
Microstructural effects on the hydrogen permeation of an Inconel alloy 690.
Corrosion Science
50 (2008).
121.- Romero-Guzman, M. E., Flores, O. Flores, A.,
Romo-Uribe, A., Alvarado-Tenorio, B., and
Campillo Illanes, B.
Cold-draw induced microstructure in PVC-bentonite nanocomposites.
Polymer Advanced Technologies. 20 (2009), 1-11. 10.1002/pat. 1586.
Liga a la publicación
Artculos en revistas de enseanza indizadas
1.- Estudio de la reaccio?n de oxidacio?n de etanol en el catalizador basado en PdCu para su aplicacio?n en celda de combustible
Liga a la publicación
Artículos in extenso de memorias de congresos y proceedings (No resúmenes)
1.- The feasibility of masks and face shields designed by 3D printing makers; some considerations of their use against the COVID-19
Liga a la publicación
2.- Thermal and Mechanical Characterization of Non-isothermal Tempering of an Experimental Medium-Carbon Steel
Liga a la publicación
3.- Dilatometric analysis of the martensite decomposition by stages during continuous heating.
Liga a la publicación
4.- Sergio Serna, Julio C. Villalobos,
Osvaldo Flores, Horacio Martínez, Edgar López and
Bernardo Campillo.
Efecto del H2S en la susceptibilidad al agrietamiento de dos aceros microaleados para tubería. KnE Engineering 3 (1), pages: 424-437. 6th Engineering, Science and Technology Conference - Panama 2017 (ESTEC 2017).
Liga a la publicación
Artículos en revistas con arbitraje NO indizadas
1.- Superficial Surface Treatment using Atmospheric Plasma on Recycled Nylon 6,6
Liga a la publicación
2.- Artificial neural network to predict the chemical composition-dependence of stacking fault energy in austenitic stainless steels.
Liga a la publicación
3.- Luminiscencia, Lumini qu?,
Liga a la publicación
4.- Residuos de aparatos elctricos y electrnicos (RAEE): Impacto Social, Ambiental, Gestin y Metodologas sobre su manejo. Waste of electrical and electronic devices (WEEE): Social, Environmental Impact, Management and Methodologies on its Handling.
Liga a la publicación
5.- VIII Escuela de Física Experimental
Liga a la publicación
Libros
1.- Fsica Experimental 2022
2.- Fsica Experimental 2022
3.- Fsica Experimental 2022
4.- Fsica Experimental 2022
5.- Escuela de Fsica Experimental VIII- 2019
6.- Fsica Experimental 2021
7.- Escuela de Fsica Experimental VIII- 2019
8.- Fsica Experimental 2021
9.- Fsica Experimental 2021,
10.- Escuela de Fsica Experimental VIII- 2019
Capítulos de libros
1.- Espectroscopa Raman en el anlisis de pelculas polimricas
de polihidroxibutirato (PHB) tratadas con plasma.
2.- Plasmas de barrera dielctrica (DBD) y sus
aplicaciones.
3.- Oscar Sotelo, John Henao, Edna Vazquez-Velez, Carlos Agustin Poblano-Salas, Horacio Martinez-Valencia.
4.- Captulo 15. Fsica del plasma. En Fsica Experimental 2021.
5.- Captulo 5. Nanofibras: avances y aplicaciones de la tecnologa. En Fsica Experimental 2021.
6.- Mujeres contribuyendo al avance de la Ciencia. Cuernavaca, Morelos. A. Hernández-Granados, H. Martínez. La Union de Morelos, Academia de Ciencias de Morelos, A.C. Noviembre 11 de 2019.
Liga a la publicación
7.- Adivina, adivinador, ¿Cuánta energía consumo y necesito yo? Cuernavaca, Morelos. A. Hernández-Granados, H. Martínez. Academia de Ciencias de Morelos, A.C. Septiembre 23 de 2019. www.launion.com.mx/blogs/ciencia/noticias/148180-adivina-adivinador-cuanta-energia-consumo-y-necesito-yo.html
Liga a la publicación
8.- Reseña de la VII Escuela de Física Experimental, Cuernavaca, Morelos, 24-27 julio 2018, J. Vergara,
Martínez H, Reyes P.G., Boletín Soc. Mex. Fís. Julio-septiembre. 32-3, 45-46 (2018).